STRUCTAFLOR® PARTICLEBOARD FLOORING QUICK GUIDE

MAKE SURE IT’S STRUCTAFLOR

Structaflor® is easily identifiable by its dark surface appearance and colour-coded tongues and coated edges.

Structaflor has unique colour-coded
tongues to identify thickness:

Yellow Tongue® – 19 mm

Red Tongue® – 22 mm

Blue Tongue® – 25 mm

Structaflor has coloured edge wax
coating to identify floor type:

Yellow Edge – Structaflor

General Purpose

Red Edge – Structaflor Terminator®

Blue Edge – Structaflor R-flor®

FOR A QUALITY FLOOR MAKE SURE IT’S STRUCTAFLOR

Features and Benefits

  • Inbuilt moisture protection
    Wax impregnated throughout
    Edge wax coated
    No need to seal uncut edges
  • Proven performance
  • Trusted by builders for 40 years
  • Third party certified by the
    Engineered Wood Products
    Association of Australasia
  • Produced in Australia from
    sustainability grown Australian
    plantation pine

PRODUCT DESCRIPTION

The Structaflor range is a structural grade particleboard sheet flooring manufactured in Australia to comply with the requirements for Particleboard Flooring, Class 1, in AS/NZS 1860.1, Particleboard Flooring. Structaflor Terminator and Structaflor R-flor have termite protection and Structaflor R-flor includes a layer of foil insulation for improved thermal performance.

Table 1: Structaflor product range

APPLICATIONS AND BENEFITS

The Structaflor range is ideal for sub-floors, suspended floors in multi-storey construction, alterations and additions and commercial applications. Use for timber sub-floor and mid-floor systems provides advantages including:

  • Reduced site impact as there is less need for bulk site excavation,
    earth retaining walls and special drainage
  •  Easier construction for split level and double storey designs
  •  Greater adaptability to later extensions or alterations
  •  Simple, economical installation of central heating, plumbing and electrical wiring
  • Underfloor space for storage and water tanks
  • Flexibility to choose from a variety of floor coverings

TERMITE PROTECTION AVAILABLE

Structaflor Terminator and Structaflor R-flor are resistant to
termites in all parts of Australia. They conform to H2 level
treatment requirements and come with a guarantee from Koppers.

Conditions apply. 
See www.kopperspc.com.au for details.

IMPROVED THERMAL PERFORMANCE

Structaflor R-flor is particleboard flooring that has been laminated with a metallized foil layer on the underside of the board, in order to:

  • Increase total R-Value of flooring system
  • Improve thermal performance and comfort
  • Reduce heat loss and energy use
  •  Improve ease of installation

EXPOSURE, STORAGE AND HANDLING

Structaflor may be exposed to the weather for up to three months, however it is always advisable to enclose the building as soon as possible after laying the floor. Any ponded water should be removed as soon as practicable. This can be achieved by drilling holes of 3 mm maximum diameter at not less than 1 metre spacing through the floor where ponding occurs and sweeping water away.  When storing outside, ensure packs are kept clear of the ground. Cover with waterproof sheeting laid on timber battens so that air circulates freely between the waterproof cover and the product. Handle and stack with care to avoid damage. Always wear dust mask, goggles and gloves when working with wood products. Refer to the website for Safety Data Sheet.

PRODUCT QUALITY

Structaflor is manufactured under a third party audited
quality control programme and is product certified by the

Engineered Wood Products Association of Australasia as compliant
with AS/NZS 1860.1, Particleboard Flooring.

Mt Gambier Lic No 002, 
Oberon Lic No 005,
Gympie Lic No 006