logo

NSW CLADDING PROFILES H3 PRE-PRIMED

Image_7

CHAMFER (166mm x 18mm)Image_1
Recommended Nail Size (mm). Direct FixRecommended Nail Size (mm). Cavity FixNail PlacementMinimum Framing Penetration
60 x 2.80 hot dipped galv* jolt head/bullet head70 x 3.15 hot dipped galv* jolt head/bullet head28mm from bottom edge of board. Nailed at 600mm (MAX) centres.35mm
WEATHERBOARD CLASSIC REBATED BEVELBACK (138mm x 18mm)image_2
Recommended NailSize (mm). Direct FixRecommended NailSize (mm). Cavity FixNail PlacementMinimum Framing
60 x 2.80hot dipped galv*jolt head /bullet head70 x 3.15hot dipped galv*jolt head /bullet head30mmfrom bottom edge of board. Nailed at 600mm(MAX) centres.Penetration35mm
WEATHERBOARD CLASSIC REBATED BEVELBACK (185mm x 18mm)image_3
Recommended NailSize (mm). Direct FixRecommended NailSize (mm). Cavity FixNail PlacementMinimum Framing
60 x 2.80hot dipped galv*jolt head /bullet head70 x 3.15hot dipped galv*jolt head /bullet head30mmfrom bottom edge of board. Nailed at 600mm(MAX) centres.Penetration35mm
WEATHERBOARD RUSTICATED (138mm x 18mm)image_4
Recommended NailSize (mm). Direct FixRecommended NailSize (mm). Cavity FixNail PlacementMinimum Framing
60 x 2.80hot dipped galv*jolt head /bullet head70 x 3.15hot dipped galv*jolt head /bullet head26mmfrom bottom edge of board. Nailed at 600mm(MAX) centresPenetration35mm
WEATHERBOARD RUSTICATED (185mm x 18mm)image_5
Recommended NailSize (mm). Direct FixRecommended NailSize (mm). Cavity FixNail PlacementNail Placement
60 x 2.80hot dipped galv*jolt head /bullet head70 x 3.15hot dipped galv*jolt head /bullet head26mmfrom bottom edge of board. Nailed at 600mm(MAX) centres26mmfrom bottom edge of board. Nailed at 600mm(MAX) centres
image_6Proven Since 1922In high corrosion zones type 316 stainless steel nails are recommended. Nail lengths are designed for minimum 35mm penetration using 45mm framing. If batten or framing is varied, nail length should be adjusted accordingly. E.g. Direct Fix for 35mm framing, 50 x 2.8 is suitable. Annular groove nails are recommended for 35mm frame applications.

 

Why choose Jenkin Tru-Pine?

  • Strong and durable
  • H3 Hazard Class protection
  • Pre-primed
  • Defect free
  • Strict quality control Proven history Plantation pine

Premium quality timber ideal for above ground, outdoor use, structurally graded, smooth, dressed finish for easy painting. Available in an extensive range of sizes. The perfect finish for your outdoor living.

USAGE
Jenkin Tru-Pine is a premium exterior treated timber for above ground use only. Ensure a timber clearance of 100mm above paved surfaces or 175mm above finished ground level is maintained.

TREATMENT
Jenkin Tru-Pine achieves a H3 Hazard Class protection rating through treatment with an advanced organic treatment using LOSP (Light Organic Solvent Preservative) that protects against fungal decay and insect attack.

FIXINGS
Use hot-dip galvanised nails, screws, bolts and brackets in general locations. For coastal conditions subject to sea spray use stainless steel.

SEALING
During the installation process all exposed unprimed surfaces resulting from cut ends, mitres, notching, boring, punched nail holes or similar should be resealed with a suitable acrylic or oil-based premium exterior timber primer.

WEATHERBOARDRUSTICATED

WEATHERBOARDRUSTICATED

WEATHERBOARD CLASSIC

WEATHERBOARD CLASSIC

 

 

 

 

 

 

 

 

Image_7

PAINTING SPECIFICATION
1. Spot prime and putty all nail holes.
2. Ensure primed surfaces are clean and free from contaminants such as dust, grease or mildew.
3. Apply a minimum of two full coats of premium acrylic exterior house paint to recommended film thickness

For a better finish and extended paint durability we recommend the application of one full coat of premium quality OIL BASED primer undercoat.

Use colours that have a Light Reflective Value (LRV) of 45 to 100 (100 being pure white). Colours with a LRV of 44 to 0 (0 being pure black) progressively generate extreme surface heat when exposed to direct sunlight and can cause resin bleed, shrinkage, distortion and cracking.It will also reduce the service life of the paint coatings.

STORAGE
Store the product in a dry environment away from damp ground until use. Kiln-dried Radiata Pine timber is hygroscopic and will absorb moisture in a damp environment and release it in a dry environment. If timber absorbs moisture, some dimensional swelling will occur.

HEALTH & SAFETY
Jenkin Tru-Pine treated products are safe to handle using normal timber handling precautions.

TECHNICAL DATA & INSTALLATION GUIDE

Please refer to the Building Code of Australia guidelines or your local building authority/council to ensure correct construction practices are followed. Jenkin Tru-Pine meets Service Class 3/AS5068 standards for structural products.

Visit www.jenkin.co.nz for technical specifications, product information guides, span tables, application guides and warranties.

Click below to find out more or contact us on: John Carroll 0414301515 and Colin Carroll 0421273887
Email for a price or more information: John@carrollswholesale.com, Colin@carrollswholesale.com

 

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.