Trupine _logo

 

NSW
PROFILES H3 PRE-PRIMED

Trupine

FASCIA BOARDS
Image_5Image_6Image_7 Image_1 DAR – D4SQ
depth – 30mm x 11mm1
Image_2 DAR – D4SQ
depth – 42mm x 11mm2
Image_3 DAR – D4SQ
depth – 66mm x 11mm3
Image_4 DAR – D4SQ
depth – 90mm x 11mm4

HAND RAILS & BOTTOM RAILS

HAND RAILS & BOTTOM RAILS SINGLE 138mm  x 30mmnew imagesDOUBLE 163mm  x 30mmnew images1

 

LINING BEAMS
TGV PATTERN 302 138mm x 11.5mm
LINING_1
GL8
140mm x 65mm
GL8
180mm x 65mm
GL8
240mm x 65mm
GL8
290mm x 65mm
TGV PATTERN 321 138mm x 11mm
LINING_2
BEAMS BEAMS_1 BEAMS_2 BEAMS_3
TGV REBATED PATTERN 412 138mm x 18mm
LINING_3
POSTS
GL8 2mm
Round Corners
63mm x 63mm
GL8 2mm
Round Corners
88mm x 63mm
GL8 2mm
Round Corners
88mm x 88mm
GL8 2mm
Round Corners
112mm x 112mm
GL8 2mm
Round Corners
135mm x 135mm
POSTS_1 POSTS_2 POSTS_3 POSTS_4 POSTS_5
TGV 90mm x 18mm
LINING_4

 

CLADDING GL8 2mm
Round Corners
185mm x 185mmCLADDING_5
MOULDINGS
QUAD
18mm
CLADDING_6
SCOTIA
30mm x 30mm
EXTERNAL CORNER MOULD
42mm x 42mm
QUAD
23mm
CLADDING_7
CLADDING_8 CLADDING_9
Tru Pine Profiles

 

Why choose Jenkin Tru-Pine?

  • Strong and durable
  • H3 Hazard Class protection
  • Pre-primed
  • Defect free
  • Strict quality control
  • Proven history
  • Plantation pine

Premium quality timber ideal for above ground, outdoor use, structurally graded, smooth, dressed finish for easy painting. Available in an extensive range of sizes. The perfect finish for your outdoor living.

USAGE
Jenkin Tru-Pine is a premium exterior treated timber for above ground use only. Ensure a timber clearance of 100mm above paved surfaces or 175mm above finished ground level is maintained.

TREATMENT
Jenkin Tru-Pine achieves a H3 Hazard Class protection rating through treatment with an advanced organic treatment using LOSP (Light Organic Solvent Preservative) that protects against fungal decay and insect attack.

FIXINGS
Use hot-dip galvanised nails, screws, bolts and brackets in general locations. For coastal conditions subject to sea spray use stainless steel.

SEALING
During the installation process all exposed unprimed surfaces resulting from cut ends, mitres, notching, boring, punched nail holes or similar should be resealed with a suitable acrylic or oil-based premium exterior timber primer.

HAND RAILS, BALUSTRADES, POSTS & BOARDS

HAND RAILS, BALUSTRADES, POSTS & BOARDS

POSTS, BEAMS & CLADDING

POSTS, BEAMS & CLADDING

 

 

 

 

 

 

 

 

Trupine

PAINTING SPECIFICATION
1. Spot prime and putty all nail holes.
2. Ensure primed surfaces are clean and free from contaminants such as dust, grease or mildew.
3. Apply a minimum of two full coats of premium acrylic exterior house paint to recommended film thickness

For a better finish and extended paint durability we recommend the application of one full coat of premium quality OIL BASED primer undercoat.

Use colours that have a Light Reflective Value (LRV) of 45 to 100 (100 being pure white). Colours with a LRV of 44 to 0 (0 being pure black) progressively generate extreme surface heat when exposed to direct sunlight and can cause resin bleed, shrinkage, distortion and cracking.It will also reduce the service life of the paint coatings.

STORAGE
Store the product in a dry environment away from damp ground until use. Kiln-dried Radiata Pine timber is hygroscopic and will absorb moisture in a damp environment and release it in a dry environment. If timber absorbs moisture, some dimensional swelling will occur.

HEALTH & SAFETY
Jenkin Tru-Pine treated products are safe to handle using normal timber handling precautions.

TECHNICAL DATA & INSTALLATION GUIDE

Please refer to the Building Code of Australia guidelines or your local building authority/council to ensure correct construction practices are followed. Jenkin Tru-Pine meets Service Class 3/AS5068 standards for structural products.

Visit www.jenkin.co.nz for technical specifications, product information guides, span tables, application guides and warranties.

More Profile Information

Most profiles are available, however some are not and may not be easy to get in small quantities. Please check with us before specifying.

For more information or contact us on: John Carroll 0414301515 and Colin Carroll 0421273887
Email for a price or more information: John@carrollswholesale.comColin@carrollswholesale.com