Western Red Cedar  –  Weather Board Cladding

Sizes and Grades

Select Appearance Grade 

SELECT APPEARANCE is graded according to the particular product and for the WFLR Series, it requires material to be free of all knots, defects and similar blemishes on the main face and bottom edge. The back face may contain slight blemishes.

For the WFLS Series, the grading requirement applies to both faces of the board as this product may be installed with either face showing – one face has a band sawn texture and the other is dressed smooth.

All of our Select Appearance Grade Bevel Siding is produced from Air Seasoned stock.

Select Tight Knot (STK) Grade

In Select Tight Knot (knotty) grade, the knots are predominately sound and tight. Other characteristics are limited so they do not detract from the end use intended.

There is no restriction on the sizes of knots and they can be expected to range in size from about a 5c piece to as large as a 50c piece. Occasional knots may be slightly larger or smaller. This grade is suitable for more casual designs or where a more rugged appearance is required. STK Bevel Siding is not reversible – ie, both faces display a saw textured surface

All of our Select Tight Knot Grade Bevel Siding is produced from Unseasoned stock.

 

Standard Sections & Sizes 

Code WF LR
Width 190, 140
Cover 176, 126
Thickness 5 to 17
WF LR Weather Boards are produced from Select Grade Air Seasoned stock – the product has a 5 mm tip and 17 mm butt.
14 mm rebate (and lap) allows the back face of all boards to sit flat against the support structure.
The WF LR Series is available with a dressed face only.

 

Code WF LS
Width 190, 140
Cover 176, 126
Thickness 5 to 17
WF LS Weather Boards are produced from Select Grade Air Seasoned stock – the product has a 5 mm tip and 17 mm butt.
14 mm lap is recommended. Each butt sits on top of the board behind providing support at the tip and butt only.
The WF LS Series is available with a dressed or sawn face.

 

Code WF LK
Width 188
Cover 167
Thickness 5 to 17
WF LK Weather Boards are produced from Knotty Grade unseasoned stock – the product has a 5 mm tip and 17 mm butt.
21 mm lap is recommended. Each butt sits on top of the board behind providing support at the tip and butt only .
The WF LK Series is available with a sawn face only.

External and Internal Corner Stops

Standard Corner Stops comprise 40 x 30 and 30 x 30 in both Square Sawn and Square Dressed (DAR).
Dressed Angle Moulds are also available in 30 x 30 and 38 x 38.

 

All TIMBECK Select Appearance Grade Weather Boards are produced from air seasoned stock. 
All Select Tight Knot (STK) Grade is produced from unseasoned stock 

 

 

 

 

 

 


Click below to find out more or contact us on: John Carroll 0414301515 and Colin Carroll 0421273887 Email for a price or more information: John@carrollswholesale.comColin@carrollswholesale.com