Western Red Cedar  –  Decorator Screening

Grade, Profiles and Sizes

Grade

Select Appearance Grade

TIMBECK Western Red Cedar Decorator Screening is manufactured from selected stock and graded to Select Appearance Grade.

SELECT APPEARANCE is graded according to the particular product and for applications like Decorator Screening, it requires material to be free of all knots, defects and similar blemishes on a minimum of one face and one edge.

Decorator Screening is part of our Square Dressed Board range but incorporating a fine sanded finish and slight easing of all corners. The easing not only provides a slightly softer appearance but more significantly, it presents a far better surface in respect to the bonding of applied surface finishes.

Decorator Screening – Schedule of Standard Sizes

28 x 17 40 x 17 65 x 17 90 x 17 140 x 17
28 x 28 38 x 38 65 x 30 90 x 30 140 x 30
40 x 28 65 x 38 90 x 38 140 x 38

Our Decorator Screening sections are machined with a light easing on all corners – as distinct from being simply “square dressed”.

A comprehensive range of dressed sizes will provide a product to suit most design requirements.
Custom Machining is a specialty process for TIMBECK and profiles to suit any screening design can easily be accommodated.

 Availability – Lengths and Surcharges

  • Decorator Screening sections are normally supplied in random lengths – please enquire about the availability of set lengths, particularly for large orders
  • Base pricing applies to lengths up to 3.6 metres
  • Lengths 3.9 to 4.8 metres generally incur a surcharge of 10%
  • Lengths 5.1 to 6.0 metres generally incur a surcharge of 15%
  • Shorter lengths, 0.9 to 1.8, are inevitably more economical & will often be discounted

Decor Series

part of the Decorator Screening Family

The DÉCOR series of profiles joined the range of TIMBECK products initially as a faux screening option.

In many cases, designers were looking for the appearance obtained from light section internal batten screening, but needed a level of privacy not available with traditional screening methods.

The concept of alternating the narrow ‘face’ and ‘groove’ width is the basic make-up of DÉCOR.  It presents an appearance similar to that of light screening and also provides the solution to the privacy issue.

TIMBECK maximised the range of design options that DÉCOR could provide by developing the profile into one, two & three groove variations across two widths and two thicknesses.

Section Sizes

The standard range within the TIMBECK DÉCOR series comprises a basic shiplap profile produced in two widths and two thicknesses. This width and thickness combination is then produced with either one, two or three grooves to provide seven different profiles.

Code   

  Cover  

  Thick  

WC DA 078 18 78 18
 The 78 mm cover WC DA section displays TWO 33 mm wide faces separated by a 6 mm wide groove.

Code   

  Cover  

  Thick  

WC DA 127 18 127 18
 The 127 mm cover WC DA section displays TWO 58 mm wide faces separated by a 6 mm wide groove.

Code   

  Cover  

  Thick  

WC DB 078 18 78 18
 The 78 mm cover WC DB section displays THREE 20 mm wide faces separated by 6 mm wide grooves
.

Code   

  Cover  

  Thick  

WC DB 127 18 127 18
 The 127 mm cover WC DB section displays THREE 36 mm wide faces separated by 6 mm wide grooves
.

Code   

  Cover  

  Thick  

WC DC 127 18 127 18
 The 127 mm cover WC DC section displays FOUR 26 mm wide faces separated by 6 mm wide grooves.

Code   

  Cover  

  Thick  

WC DF 078 26 78 26
 The 78 mm cover WC DF section displays TWO 27 mm wide faces separated by a 12 mm wide groove.

Code   

  Cover  

  Thick  

WC DG 078 26 78 26
 The 78 mm cover WC DG section displays THREE 14 mm wide faces separated by 12 mm wide grooves.

 

 

Click below to find out more or contact us on: John Carroll 0414301515 and Colin Carroll 0421273887 Email for a price or more information: John@carrollswholesale.comColin@carrollswholesale.com