Western Red Cedar  –  Construction Screening

Grade, Profiles and Sizes

Grade

The natural beauty of Western Red Cedar, often enjoyed in so many applications throughout residential and commercial buildings can be as equally suited to very practical screning applications. Not only can this prized timber provide the appearances so widely sought after, but often the most cost effective solution as well. Shorter lengths of Western Red Cedar are extremely cost effective. Screens requiring components less than 2 metres in length are often found to be most economical when built with Western Red Cedar.

Select Appearance Grade

TIMBECK Western Red Cedar Construction Screening is manufactured from selected stock and graded to Select Appearance Grade.

SELECT APPEARANCE is graded according to the particular product and for applications like Construction Screening, it requires material to be free of all knots, defects and similar blemishes on a minimum of one face and one edge.

Construction Screening is identical to our Square Dressed Board specification – corners are sharp and square and in some cases, one face of a piece may have a very fine sawn surface (off a splitting saw). If a higher standard of finish is required (fine sanded faces and lightly eased corners), specifiers should look to our ‘Decorator Screening’ range.

 

Square Dressed Sections

Part of our “Square Dressed Board” range – other sizes are also available.

Size

Code

Size

Code

30 x 12 WD SQ 030 12 30 x 30 WD SQ 030 30  
40 x12 WD SQ 040 12 40 x 30 WD SQ 040 30
65 x 12 WD SQ 065 12 65 x 30 WD SQ 065 30
90 x 12 WD SQ 090 12 90 x 30 WD SQ 090 30
115 x 30 WD SQ 115 30
140 x 30 WD SQ 140 30
190 x 30 WD SQ 190 30
17 x 17 WD SQ 017 17
30 x 17 WD SQ 030 17
40 x 17 WD SQ 040 17 38 x 38 WD SQ 038 38
65 x 17 WD SQ 065 17 65 x 38 WD SQ 065 38
90 x 17 WD SQ 090 17 90 x 38 WD SQ 090 38
115 x 17 WD SQ 115 17 115 x 38 WD SQ 115 38
140 x 17 WD SQ 140 17 140 x 38 WD SQ 140 38
190 x 38 WD SQ 190 38

all SQUARE DRESSED sections have standard machined square corners
product with arissed corners is also available – minimum quantities may apply – finished sizes may be slightly smaller

Dressed and Pencil Round Sections

Size

Code

Size

Code

65 x 17 WS PR 065 17 65 x 30 WS PR 065 30
90 x 17 WS PR 090 17 90 x 30 WS PR 090 30

65 & 90 x 17 corners are rounded – 3 mm radius
65 & 90 x 30 corners are pencil round – 6 mm radius
other radius rounds also available – minimum quantities may apply

Custom Machining – Profiles Detailed to Your Specification

TIMBECK’s manufacturing facilities comprise state of the art wood machining technology capable of producing finished profiles to the highest levels of quality and accuracy.

This technology together with TIMBECK’s own expertise provides the essential ingredients necessary for a custom machining facility.

This service provides designers the opportunity to look beyond the range of standard profiles typically available for timber products, and have produced, sections which match exactly any of their unique details.

TIMBECK’s Custom Machining facility is available for special production runs of most species of timbers.

 

Availability – Lengths and Surcharges

  • Construction Screening sections are normally supplied in random lengths – please enquire about the availability of set lengths, particularly for large orders
  • Base pricing applies to lengths up to 3.6 metres
  • Lengths 3.9 to 4.8 metres generally incur a surcharge of 10%
  • Lengths 5.1 to 6.0 metres generally incur a surcharge of 15%
  • Shorter lengths, 0.9 to 1.8, are inevitably more economical & will often be discounted

 

 

Click below to find out more or contact us on: John Carroll 0414301515 and Colin Carroll 0421273887 Email for a price or more information: John@carrollswholesale.comColin@carrollswholesale.com